不銹鋼1.4313是馬氏體級，耐蝕化高朝，熱正確清理后耐久度性好。X3CrNiMo13-4鋼的機械性機械性能力是原因電學好分中鉬和鎳的高氧濃度。這不銹鋼管插入劑要求了加強級碳氧濃度的所需——給定氧濃度就好比于奧氏體不銹鋼。而是鎳氧濃度不太高，但鎳氧濃度約為4%，取得增長了鋼對繁多蝕化生態的對抗力——2次機械性機械性能力。X3CrNiMo13-4鋼朋友可加工制造高達hg300℃在溫度下做工作的產品加工圖和產品加工圖，或者泄露在繁多蝕化生態中的產品加工圖，此外實現充分的表面能前提必備條件括抗氯化物材質)。QT650.QT780和QT900前提必備條件下，熱正確清理后最經常交給鋼材。半的成品用以油氣加工制造.煤化工.在冶金工業和資源該行業，渦輪機機泄露在高和緩高溫下.泵.壓解機零件。鋼痛感合電弧焊接。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50供應信息EN1.4313馬氏體不繡鋼有熱處理特征（+A）的情形、回火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，想要哪一款 某種要跟業務量說清理哦。